source /opt/pkg/petalinux/2019.2/settings.sh To confirm:
PetaLinux v2019.2 ... cd ~ petalinux-create --type project --template zynqMP --name test_project cd test_project petalinux-config --get-hw-description=<path_to_hdf> If no HDF available, just run petalinux-config to generate a default config – it should open the config menu without errors. 6. Common Pitfalls & Fixes (2019.2) | Issue | Solution | |-------|----------| | petalinux-config: command not found | Re-run source settings.sh | | No module named 'gnome' / Python errors | Use Python 3.6+ but ensure python points to Python 3 ( sudo apt install python-is-python3 ) | | tftp-hpa errors during build | Install TFTP server: sudo apt install tftpd-hpa | | Path too long | Do not install inside /home/user/... . Use /opt or /tools | | libssl errors | Install libssl1.0-dev (Ubuntu 18.04) or compat-openssl10 (CentOS) | | xsct fails | Run petalinux-util --installxsct (only if using Vitis/XSCT) | 7. Uninstall (if needed) rm -rf /opt/pkg/petalinux/2019.2 Remove the source line from ~/.bashrc . 8. Quick Reference | Command | Purpose | |---------|---------| | source <install>/settings.sh | Set environment | | petalinux-version | Check version | | petalinux-create -t project -n <name> | New project | | petalinux-config | Configure kernel / rootfs | | petalinux-build | Build project | | petalinux-package --boot | Create boot image | Final note: PetaLinux 2019.2 is not compatible with Vivado 2020.1+ hardware handoff (XSA/HDF). Use the exact Vivado 2019.2 to generate your hardware description file. petalinux 2019.2 installation guide
# PetaLinux 2019.2 source /opt/pkg/petalinux/2019.2/settings.sh Then reload: source /opt/pkg/petalinux/2019