Mtk Bypass Tool Handshaking Error «2K - HD»

Arjun grabbed the Python source of the bypass tool. He traced the handshake function:

He leaned back, running a hand through his hair. The phone—a bricked Infinix Hot 10—sat lifeless, its boot loop mocking him. All because he’d tried flashing a custom recovery without unlocking the bootloader properly. Now, the MediaTek preloader was stuck in a handshake war with his laptop. mtk bypass tool handshaking error

[INFO] Device connected: MediaTek USB Port (COM5) [INFO] Sending handshake (modified sequence)... [INFO] Handshake successful! [INFO] Bypassing SLA/DAA... [INFO] Exploit sent. Device ready for flash. Arjun exhaled. The phone’s screen stayed black—but in SP Flash Tool, the memory regions were now visible. He flashed the stock firmware, and ten minutes later, the Infinix logo glowed white. Arjun grabbed the Python source of the bypass tool

He saved the modified script, wrote a quick README, and posted it on GitHub at 2:14 AM. All because he’d tried flashing a custom recovery

The next morning, three people had already thanked him. One of them was from a small repair shop in Karachi who’d been stuck on the same error for two weeks.

def handshake(dev): # Send two dummy packets to reset preloader state dev.write(b'\xff\xff\xff\xff\xff\xff\xff\xff') time.sleep(0.02) dev.write(b'\x00\x00\x00\x00\x00\x00\x00\x00') time.sleep(0.05) ack = dev.read(1) # Newer chips respond with 0xA5 after a delay, but sometimes 0x5A first if ack == b'\x5a': time.sleep(0.03) ack = dev.read(1) # second byte is 0xA5 if ack != b'\xa5': raise HandshakeError(f"Expected 0xA5, got {ack.hex()}") He saved the script as mtk_bypass_fixed.py , ran it with admin privileges, and held down the volume buttons as he plugged the phone in.

It was 11:47 PM when Arjun’s screen flickered with the dreaded red text: