Lambert Lx 24 Fi Instrukcia May 2026

Keep this article with your boiler’s official manual. For firmware-specific instructions or revised error codes, scan the QR code on the boiler’s side label or visit the Lambert support portal.

| P-code | Function | Default | Adjust range | |--------|----------|---------|---------------| | P01 | Maximum CH power | 24 kW | 5–24 | | P02 | Pump post-circulation time | 3 min | 0–10 | | P03 | Antifreeze activation temp | 5°C | 3–10 | | P05 | DHW preheating (comfort) | 0 (off) | 0/1 | | P08 | Minimum CH power | 5.4 kW | 3–10 | | P10 | Fan speed offset | 0 | -5 to +5 | lambert lx 24 fi instrukcia

A: Normal post-purge (up to 3 min) or pre-purge in cold weather. If permanent >15 min, check P02 parameter. Keep this article with your boiler’s official manual

A: Typically a dirty DHW plate heat exchanger or low flow rate. Clean the inlet filter first. If permanent >15 min, check P02 parameter