: Place a known calibration weight on the scale and enter calibration mode via the internal service switches to adjust readings for accuracy. Troubleshooting Inconsistent Readings : Ensure the scale is level and recalibrate if necessary. Label Errors : Check the gap sensor calibration if labels are not printing or feeding correctly.
: For standard changes like price or weight (Barcode) setup, enter Digi Sm-90 User Manual
Open the side compartment and remove the old label roll core. Insert the new roll, ensuring it slips the bar rather than going under it. : Place a known calibration weight on the
: Keep the device away from extreme temperatures and moisture to prolong its lifespan. Compatible Supplies typically uses direct thermal labels. Common sizes include: Digi Scales Sm 90 Manual - CLaME : For standard changes like price or weight
: Place the scale on a flat, stable surface. Ensure the power supply is connected correctly. Loading Labels
in Z mode and adjust the specific "SPEC" settings (e.g., SPEC 001 for price vs. weight). Maintenance and Calibration Calibration
: To connect via Ethernet, the scale's IP must be on the same submask as the PC (e.g., if the PC is 192.168.0.XXX , the scale should be configured between for the final digits). Programming and Operation Accessing Modes